SereneLife PSLCLM60, User Manual, Page: 16 / 20

16
Problem Possible Cause Corrective Action
Excessive vibration or noise
The blade may be loose Remove the safety key from the
socket,, and remove battery, turn
the mower over on the right side,
and check that the blade is tightly
attached or not, if not, tighten the
blade.
The blade may be unbalanced,
bent, or damaged
Remove the safety key from the
socket, and remove battery, turn
the mower over on the right side,
remove the blade, and check its
condition.
Replace with a new blade if nec -
essary.
Mower runs, but cutting perfor -
mance is unsatisfactory, or there
is a loss of power
The battery is not fully charged Charge the battery 10-12 hours
to get a full charge
The blade may be dull Remove safety key from the sock -
et, and remove battery, turn the
mower over on the right side, and
check the condition of the blade.
Sharpen or replace the blade, if
necessary.
The blade may be bent, loose, or
damaged
Remove the safety key from the
socket, and remove battery, turn
the mower over on the right side,
and check the condition of the
blade. Sharpen or replace the
blade, if necessary
The grass may be too high or too
thick for the cutting height
Raise the cutting height or narrow
your cutting swath and try again.
The Mower is moving too fast Slow down a little bit
Battery loses its power quickly
The battery is not fully charged Charge the battery 5 hours to get
a full
charge ,You will need to charge
the battery at least five times to
achieve maximum cutting time
The grass may be too high or too
thick
Raise the cutting height or narrow
your cutting swath
The battery may be getting old The battery will need to be re-
placed.
Collection bag is collecting grass
poorly
The collection bag is full Empty the collection bag, and
clean it if necessary.
The grass is too long, or the
Mower is cutting too low
Raise the cutting height
The Mower is moving too fast Slow down
The rear discharge may be
clogged
Remove the safety key from the
socket, and
remove battery, turn the mower
over on the right
side, and clean away any debris
from the rear
discharge plate and below the
deck