SereneLife PSLCLM60 User Manual Download Page 11

11

Fig. 13

Figure 13

Instructions for mowing without the grass collection bag

We recommend:

• The grass should not be too high nor too wet!

• Mow slow while mowing.

• Do not cut grass more than 20mm (see Fig. 16)

Mowing tips:

If grass residue is left in the discharge opening, pull mower backwards about 1-2m so that the grass resi

-

due can drop out downwards.

To produce a well-maintained lawn, we recommend mowing the lawn as often as you can, once a week if 

possible, so that you are only cutting 1 to 2 Inches (20mm to 50mm) of grass each mowing session< see 

Fig. 6) . Trying to cut more than 2 inches (50mm) will drastically reduce the charge life of the battery and 

quality of the cut.

Before starting the mower, adjust the cutting height so that you only cut 1 to 2 inches (20 mm to 50mm) 

of grass at a time <see figure 6) . Cut thicker grass at a higher cutting height, or cut a narrower swath. Do 

not force the mower forward in tall, thick or wet grass. 

After relatively long intervals between mowing (holiday lawn), first of all cut in one direction with the cutting 

height as high as possible, then cut in the crosswise direction at the cutting height required.

Interruptions of work:

Never leave the mower unattended at the working area. If you interrupt your work, store the mower in a 

safe place, remove battery power plug from battery power socket. If you stop work to move to another area 

of the garden, switch off the mower and remove safety key form the socket!

LED battery charge-control Indicator

The battery pack is equipped with a LED battery charge-control Indicator ,which indicates the battery 

capacity and ifs temperature.

Fig. 14  

 

 

 

    Fig. 15

Summary of Contents for PSLCLM60





















Reviews: