4
Serene S2044 ROMA Space Heater
Thermostat
The heat output is regulated by a built-in thermostat. The thermostat
maintains the required ambient temperature by automatically turning
the heater on and off.
Starting from the ‘Freeze Guard’
position, turn the thermostat knob
clockwise until you hear a ‘click’. The heater will then start heating and
the LED indicator will light up. The more the thermostat knob is turned
clockwise, the higher the ambient temperature will be.
If the ambient temperature is close to 30°C or more, the heater may not
turn on even if the thermostat is set on maximum. Alternatively, if the
ambient temperature is below 5°C, the heater may operate
continuously even if the thermostat is set on minimum.
To set the thermostat:
1.
Turn the thermostat knob
clockwise to maximum
and wait until a
comfortable ambient
temperature is reached.
2.
Turn the thermostat knob
anti-clockwise until you
hear a ‘click’ and the
heater turns off.
3.
Fine adjustments can
then be made.
Freeze Guard
LED Indicator
Freeze Guard
Thermostat Knob
When the thermostat knob is turned fully anti-clockwise, pointing to the
‘Freeze Guard’ symbol, the heater will operate if the room
temperature falls below 5°C.
Note:
This heater does not have an on/off switch. To turn the heater off
it must be turned off at the wall switch. At times when the Freeze Guard
function is not required, it is recommended that the heater is turned off
using the wall switch.
