9
Serene HB80/110
Maintenance
Service Manual
3
Maintenance
Cleaning
Many commercially available cleaning products contain solvents that
may attack the plastic components of this product and cause them to
crack. It is important to use only warm water and a small amount of
detergent when cleaning this cooler. Do not use abrasive or corrosive
cleaners or boiling water.
Isolate the chiller from the power supply before cleaning.
When necessary, wipe both the interior and exterior of the cabinet
with a damp cloth. Do
NOT
flush the cabinet with water.
Clean the door gasket once every three months.
The condenser coil (located on the back of the cabinet) should be
brushed regularly to remove any dust build up.
Figure 4: Condenser Coil
(HB80 pictured)
Condenser coil
Cabinet back