background image

3

Important Safety Tips

Precautions

Please read the Manual carefully before operating the machine:

 

This machine is for household use only.

 

This machine is for indoor use only. Please place it in dry environment.

 

Check power cord frequently. When power cord, plug or A/C is damaged,     

  please don’t operate. If the power cord is not long enough, power 
  extension cable can be used. Cable should not scatter at places where    
  power cord may be pulled out or people may be stumbled.

 

The A/C should be away from heat source and avoid direct sunlight.

 

Turn off the A/C before unplugging.

 

Turn off and unplug the A/C before removing or cleaning it, or replacing  

   its parts or when it is not used.

 

Clean the A/C according to the Manual.

 

Voltage of the A/C should meet requirements. Any damage incurred by  

   incorrect power isn’t included in the warranty.

 

Children are not allowed to play with the A/C. This appliance is not  

 

   intended for use by persons (including children) with reduced physical,  
   sensory or mental capabilities, or lack of experience and knowledge,    
   unless they have been given supervision or instruction concerning use of  
   the appliance by a person responsible for their safety.

 

Don’t insert your fingers or any hard object to wind guide bar of the air  

   outlet.

 

Don’t place the A/C at any place with water or other liquid.

   Prevent water or liquid from entering the A/C.

 

Don’t repair the A/C by yourself. Any possible hazard incurred by 

   maintenance of laypeople will violate the warranty. If the supply cord is  
   damaged, it must be replaced by professional maintenance personnel.

 

Please use the accessories provided by the A/C manufacturer; otherwise,  

   the A/C may be damaged.

 

Suggest using environmental temperature for the air conditioner 

   (Cooling): 15°C-35°C or 59°F-95°F.

www.SereneLifeHome.com

Summary of Contents for SLPAC8















Reviews: