Sercomm IP802SM V2 Quick Start Manual Download Page 35

Page: 35 / 76

Operation and Status

Other Connection Methods

Apart from "Travel Mode (Hotel)", the other connection possibilities are:

•

PPPoE

- this is the most common login method for DSL modems. Normally, your ISP

will have provided some software to connect and login. If using the Wireless 3-in-1 Com-
panion, this software is not required, and should not be used.

•

PPTP

- this is mainly used in Europe. You need to know the PPTP Server address as well

as your name and password.

•

L2TP

- this is not widely used. You need to know the L2TP Server address as well as

your name and password.

•

No Login (Static IP address)

- Use this if you have a static (fixed) IP address, and do not

need to login to a server to gain access to the LAN or WAN.

To determine which method to use, you should ask the administrator of the LAN or WAN to
which you are connecting.

The following image and table shows all available settings.

Figure 14: Ethernet Port Configuration - All Settings

Summary of Contents for IP802SM V2













































































Search results

Summary of Contents for IP802SM V2

Reviews:

Related manuals for IP802SM V2

Brands by name

Popular brands

Sercomm IP802SM V2, Quick Start Manual

Search results

Summary of Contents for IP802SM V2

Reviews:

Related manuals for IP802SM V2

Brands by name

Popular brands