Sercomm Genesis OC3505D, Quick Installation Manual, Page: 6 / 8

6
6. Manually adjust the Genesis CPE vertically and horizontally until you have obtained the
best RSRP (-80) (this value is not guaranteed depending on installation location) and SINR
(30 or higher) values. These values will refresh every 2 seconds.
If SINR < 5

Double check the eNode direction.

Adjust the Genesis CPE so SINR will raise with minimum RSRP drop.

Try another location.
If RSRP < -120

Manually adjust the Genesis CPE to obtain a better RSRP value.

Try another location.
7. Restore the computer IP to DHCP mode in order to access the Internet again.
8. Follow Step 2 &3 to access Genesis FWA CPE..
Step 6 : Final Check
1. Tighten the M6 hex bolts on the mounting bracket.
2. Install the Genesis CPE side door to cover all I/O ports. (PH1 screwdriver required)