Sercomm AP101nA, User Manual, Page: 53 / 105

Wireless Access Point User Guide
Internet Authentication Service (Radius) Setup
1. Select Start - Programs - Administrative Tools - Internet Authentication Service
2. Right-click on Clients , and select New Client .
Figure 39: Service Screen
3. Enter a name for the access point, click Next .
4. Enter the address or name of the Wireless Access Point, and set the shared secret, as
entered on the
Security Settings of the Wireless Access Point.
5. Click Finish .
6. Right-click on Remote Access Policies , select New Remote Access Policy .
7. Assuming you are using EAP-TLS, name the policy
eap-tls
, and click Next .
8. Click Add...
If you don't want to set any restrictions and a condition is required, select Day-And-Time-
Restrictions , and click Add...
Figure 40: Attribute Screen
9. Click
Permitted
, then
OK
. Select
Next
.
10. Select Grant remote access permission . Click Next .
50