Wireless Access Point User Guide
Setup Procedure
1.
Select the desired Wireless Access Point.
2. Click the
Set IP Address
button.
3.
If prompted, enter the user name and password. The default values are
admin
for the
User Name
, and
password
for the
Password.
4. Ensure
the
IP address
,
Network Mask
, and
Gateway
are correct for your LAN. Save any
changes.
5. Click the
Web Management
button to connect to the selected Wireless Access Point using
your Web Browser. If prompted, enter the
User Name
and
Password
again.
6.
Check the following screens, and configure as necessary for your environment. Use the
on-line help if necessary.
The later sections in this Chapter also provides more details about each of these screens.
7.
You may also wish to set the admin password and administration connection options.
These are on the
Admin Login
screen accessed from the
Management
menu. See Chapter
6 for details of the screens and features available on the
Management
menu.
8. Use
the
Apply
and
Reboot
buttons on the menu to apply your changes and restart the
Wireless Access Point.
Setup is now complete.
Wireless stations must now be set to match the Wireless Access Point. See Chapter 4 for
details.
10
REMARK
˜˘˘˘ʳˋ˃˅ˁ˄˄˵ʳ̂̅ʳˋ˃˅ˁ˄˄˺ʳ̂̃˸̅˴̇˼̂́ʳ̂˹ʳ̇˻˼̆ʳ̃̅̂˷̈˶̇ʳ˼́ʳ̇˻˸ʳ˨ˁ˦ˁ˔ˁʳ˼̆ʳ˹˼̅̀̊˴̅˸ˀ˿˼̀˼̇˸˷ʳ̇̂ʳ˶˻˴́́˸˿̆ʳ˄ʳ̇˻̅̂̈˺˻ʳ˄˄ˁ