Serai MT/BZERO, Manual

Page: 4 / 12

DAL
1965
2 A - HOW TO USE THE GRAPH
Measure "E", and draw a horizontal line on the graph at the read measure.
Choose a point on the drawn line, considering the desired opening angle, suitable to the
column.
Draw a vertical line from that point and determinate the A value.
Verify that the A value allows the fixing of the rear bracket to continue the installation,
otherwise choose another point on the scheme.
Finally, bring the piston to the limit of the travel to fix the rear bracket to the leaf
(see the following picture).
This, however, by avoiding that the sliding pivot touches the aluminium body.
A
E
2 - BRACKETS INSTALLA T ION SCHEM E