Fig 13
!
9- To make easy the eventual removal of the motor
and avoid any damage of the foundation box, insert
the 4 galvanized plates (which are supplied) in the
4 ends-inside the special circular places. See
picture no. 13.
10- Insert the motor, the telescopic arm and fix the
bracket on the gate. See Fig. 13.
IMPORTANT
: lubricate the telescopic arm with
grease.
ATTENTION:
- Leave at least 35 cm of feeder under the
motor, for taking out the motor in case of
maintanance. Fig. 13
- The connection between the power supply
cable of the motor and the cable of the
control panel has to be carried out outside
the foundation box and inside a weather
proof housing. On the contrary a water
infiltration may be occur through the
power supply cable causing the motor
failure. See Fig. 13
11- Give power supply to the motor.
Weather proof
casing
35 cm of feeder
SKY BLUE =
OPEN/CLOSE
BROWN =
OPEN/CLOSE
ELECTRIC CONNECTIONS OF MOTOR
Connect the motors to the electronic control unit by means of cables
2
with a section of 2.5 mm .
SKY BLUE cable : Open/Close
BROWN cable: Open/Close
TURN OFF
POWER
SUPPLY
BEFORE
WIRING-UP
!
Reversing electromechanical motor for wing gates up to 2.20m each gate-wing and max. weight 250 kg.
Power supply..................................................24 V- ±25% Weight..............................................................10,7 kg
Max leaf lenght......................................................2,20 m Opening time for 90°.............................................13 s
Max leaf weight......................................................250 kg Protection rating...................................................IP67
Max opening angle.....................................................180° Operating temperature...........................-20°
¸
+60°C
Max absorption..........................................................2,8A Dimensions......................................302x154x202mm
Power.......................................................................60 W
Max thrust............................................................175 Nm
Angular speed...................................................0,12 rad/s
GEARMOTOR TECHNICAL SPECIFICATIONS
M
T
/7
1
I
E
0
1
0
5
0
8
0
4
1
7
-
A
4
V
f/
r
-
IS
M
T
7
1
-I
S
-E
E L E T T R O N I C A P A D O V A
I
S
IN
C
E
1
9
6
5
M A D E I N I T A L Y
VIA ENRICO FERMI, 22
35020 LEGNARO - PADOVA
I T A L I A
PHONE +39 049 79 08 58
FAX +39 049 88 30 529
E-MAIL [email protected]
WEB www.serai.com
TERMS OF GUARANTEE
The company reserves the right to make modifications to the equipment without prior notice thereof. SERAI products are covered by a standard guarantee with a term of 24 months.
Coverage starts on the date on which the tax document constituting proof of purchase is issued and guarantee services shall be provided on the company's premises at Legnaro - PD -
or at the Authorised Service Centres. Carriage costs shall be borne by the Customer.
CE CONFORMITY DECLARATION
SERAI spa declares that the product MT/71 has been desifned and manufactured according to the above mentioned directives and standards
WEEE DIRECTIVE 2002/96/EC
This appliance was manufactured after 13/08/2005. To protect the environment: when the equipment is no longer needed, take it to a special WEEE (Waste Electric and
Electronic Equipment) collection centre. Do not dispose of it with normal household waste.
N.B. For stopping the gate-wings it is necessary to
install the electric lock -see the relevant
instructions-
Max. Working cycle: - opening.................................20s
- pause with opened gate........22s
- closing...................................20s
- pause with closed gate..........32s
