SEPTENTRIO AsteRx-U3, User Manual

Page: 53 / 83

5.1. HOW TO CONFIGURE THE ASTERX-U3 AS AN RTK BASE STATION USING THE UHF RADIO
Step 3: Con fi guring the UHF radio
The UHF radio can be con fi gured in the ‘ UHF ’ window. In the example show in Figure 5-4, the
radio will transmit at a frequency of 410 MHz, channel spacing of 12.5 kHz and at a power of
100 mW
1
. The transmission protocol and error method can also be selected on this page as
shown.
The frequency and bandwidth are con fi gured via the Advanced Settings menu. Note that,
the baud rate of the connection depends on the Protocol and Bandwidth settings as given
in Appendix 9.2.
Figure 5-4: Con fi guring the UHF radio
1
Please note that, depending on your location, you may be prohibited from transmitting on certain
frequencies or at certain power levels.
53