CHAPTER 3. CONF
I
GUR
I
NG THE ASTERX SB PRO D
I
RECT
3.1.3 Connecting to the web interface via USB
Step 1: Connect the combined Power/USB cable
Connect the combined Power/USB cable to the 7-pin female PWR-COM2&3/USB socket on
the rear panel of the receiver as shown in Figure 3-4 and make sure it is connected to a LAN
network. Then connect the power cable to the receiver and make sure the correct input
voltage is applied (between 4.5 and 36 V DC).
Figure 3-4:
Rear panel 7-pin PWR-COM2&3/USB socket
Step 2: Open a web browser and connect to the AsteRx SB
ProDirect
Once connected via USB, the AsteRx SB ProDirect can be reached using the default
Ethernet-over-USB
I
P address 192.168.3.1 as shown in Figure 3-5. Note that this address
cannot be changed.
Figure 3-5:
Connecting to the Web
I
nterface via USB
11
