background image

12

6. Approvals

 
The product is CE-labelled under the EMC Directive 2014/30/EU, the Machinery 
Directive 2006/42/EC and the RoHS Directive 2011/65/EU.

The CE label can also be found on adequately large nameplates.

Within the meaning of the Machinery Directive 2006/42/EC, this document is an:

•  Operating Manual according to Art. 5(1) and Annex 1, Number 1.7.4

Within the meaning of the EMC Directive 2014/30/EU, this document is/are:

•  Assembly instructions according to Art.18(1)
•  Installation instructions according to Art. 18(1)
•  Operating Manual according to Art. 18(3)
•  Maintenance Manual according to Art. 18(1)

Usage restriction notice for residential areas according to Art. 18(2) Supporting 
documents according to Annex 1, Number 1

The information contained in this document and the specification is applicable to 
assembly, installation, operation, usage, and maintenance of the product.

  

SEPA

 

EUROPE

 

GmbH

 

 Hartheimer Straße 6 

• 

D-79427 ESCHBACH 

Phone:  +49 (0) 7634/5 94 59-0 

• 

Fax  +49 (0) 7634/5 94 59-199

E-Mail: [email protected] 

 Internet: www.sepa-europe.com

As per 06/2016

Summary of Contents for MEB50E-05













Reviews: