SEON Trooper TR4, Installation And User Manual

Page: 27 / 90

Installation
700-0035 R004 2–7
The camera cable should be long enough to reach from a camera mounted to the
header or ceiling of a bus down to the DVR lock box. Different cable lengths can
be obtained by contacting Seon Design.
The camera cable can be surface run or concealed.
Surface run
Installation If the installation is surface run, ensure that the camera cable is secured at multiple
points and is protected from sharp corners.
Concealed
Installation If the cable is concealed, it can be pulled from either end. Pulling from the
connector end will require larger holes in panels. Pulling from the wire end will
require the cable to be disconnected from the camera.
Feed the cable through the large cable grommet on the DVR lock box. The
connectors can be fed through the grommet one at a time, or the grommet can be
cut at the top and the cables can be simply slid into the grommet. Leave enough
cable in the DVR lock box to allow the DVR to slide all the way back.
Figure 2-4
Terminal blocks in the camera
Table 2-2 Camera cable wiring
Item Color Description
1 Red Power positive (+)
2 Black (and silver) Power ground (–)
3 Green Audio positive (+). Disconnect on the camera if using
the remote microphone.
4 White Audio ground (–). Disconnect on the camera if using
the remote microphone.
5 Yellow or orange Video positive (+)
6 Blue or brown Video ground (–)
1
2
3
4
5
6
3
2