Senville SENAP-W36US Instruction Manual Download Page 9

Filter cleaning/replacement

When the UV light on the display panel flashes, 

it prompts you to replace the filter

Please select a filter that matches the model of the 

machine for replacement. Please purchase from your 

local authorized dealer.

For more details on the installation of the filter, 

please see the “installation” section.

Press the UV button for 3 seconds, 

the filter resets and restarts the timer

Cleaning

Maintenance

WARNING: 

RISK OF ELECTRIC SHOCKThese servicing instructions are for use by qualified 

personnel only. To reduce the risk of electric shock, do not perform any servicing other than that 

contained in the operating instructions unless you are qualified to do so!

- It is recommended to clean the filter twice a week and replace the filter half a year (adjust the cleaning and 

replacement cycle according to the use environ-ment);

- Can not wash the filter;

- Smaller soft brushes or household vacuum cleaners are recommended for filter cleaning.

- When using the brush to clean, it should be brushed horizontally along the filter to avoid vertical brush, so as not to 

damage the filter;

- When cleaning with a vacuum cleaner, keep the suction outlet 5-1Omm away from the surface of the filter so as 

not to damage the filter.

- When used under the strong odor produced by cigarettes, barbecues, etc., the filter may have an odor in a matter 

of weeks or months. Please clean and dry filter (2-5 days). If you still cannot eliminate the odor, replace the filter.

8

Summary of Contents for SENAP-W36US














Reviews: