Display Navigation Guide, TotalSense Series
Page 6 of 19
154-0042-0B
Parameter
Description
Selections
Functionality
Settings >
Display>
Screen
Lock
Lock out access
to home screen
and settings
Enable
Screen lock mode will initiate after
60s
of inactivity.
Screen saver will be shown until device is unlocked by
holding the up and down buttons for
5s
.
Disable
(default)
Display will show home screen when any button is
pressed.
Settings >
Display>
Screen
Saver
Choose what to
display when
inactive
Off
Display will turn off after
60s
if inactivity. No screen saver
will be displayed. Screen will remain blank until any
button is pushed.
Air Quality Icon
The AQ leaf icon will be displayed when inactive in either
green, yellow, or red depending on
Air Quality Msg
(default)
Good air quality (green), Fair air quality (yellow), or poor
(red) air quality will be displayed when inactive based on
CO2 reading
Current CO2 reading will be displayed in PPM.
Temp reading
Current Temp reading will be displayed in either
o
F or
o
C.
See
RH reading
Current RH reading will be displayed in %.
PM
PMx value will be displayed in center (µg/m
3
). Choose
particle size in
. Readings over 999 will be
shown as mg/m
3
.
TVOC PPB
Current TVOC reading will be displayed in center (PPB).
TVOC µg/m
3
Current TVOC reading will be displayed in center (µg/m
3
).
Readings over 999 will be shown as mg/m
3
.
Home
Readings
Display will cycle through all present sensor readings that
are chosen to be displayed on the main screen. See
parameters: Center, Upper right, Lower Left, and Lower
Right.
All Readings
Display will cycle through all present sensor readings
from this list: temp, RH, CO2, TVOC, PM, and Air Quality.
Settings >
Display>
Menu
Brightness
Adjust brightness
of screen
Low, medium,
high
(default: high)
Adjust value to increase or decrease brightness of home
screen and menu display.
Settings >
Display>
SS
Brightness
Adjust brightness
of screen saver
Low, medium,
high (default:
low)
Adjust value to increase or decrease brightness of screen
saver.
