•
Check the edges of the Withdraw block for burrs, and file or sand as needed
•
Battery or battery holder terminals may be dirty or corroded. Clean them with tuner cleaner from
Radio Shack. If the green led dims significantly immediately after the combination is entered and
the solenoid energized, the batteries are bad or there are bad connections.
•
The safe shown in the pictures had its handle broken off during a failed robbery attempt. We
repaired the handle by drilling several 1/8" holes into the handle and into the stub, roughing both
surfaces, then using PC7 epoxy liberally on the pins and joint, and allowing fully to cure.
(by John L Menke, Menke Scientific, 2010)
•
