Accuracy: -25
℃～
-10
℃
):
±
3
℃
(-13
℉～
14
℉
):
±
5
℉
(-10
℃～
30
℃
):
±
2
℃
(-14
℉～
86
℉
):
±
4
℉
(30
℃～
560
℃
): 1%
±
1
℃
(-86
℉～
1040
℉
): 2%
±
2
℉
Operating environment: temperature:
0
O
C~50
O
C (32
O
F~122
O
F)
Relative humidity: 10~80%RH
Weight: about 195g (including battery)
Dimension: 180x48x96mm
III.
Panel Description (see Figure 2)
A: infrared sensor
B: laser sight
C: liquid crystal display
D: backlight selection button
E: emissivity selection button
F: MAX, MIN and AVG selection button
G: Scan trigger
H:
℃
/
℉
switch button
I: laser selection switch
Ⅳ
Display ( see Figure3)
1.
Scan mode symbol
2.
Low voltage symbol
3. Backlight symbol
4. Laser on symbol
5. Emissivity (6 options)
6.
O
C/
O
F symbol
7. Data storage symbol
8. MAX symbol
9. MIN symbol
10. AVG symbol
IV.
How it works
Infrared thermometers measure the surface temperature of an object. An optical component
of the unit collects energy emitted, reflected and transmitted and focuses it onto a detector. Then an
electronic component translates the information into a temperature reading which is displayed on
the unit. The laser is used for aiming purpose only.
VI. Operating Instructions:
1.
Install a 9v battery and pull the “Scan Trigger” to turn the power on. If the backlight is needed
but it's not on, press the “Backlight Button” (Button L) at the bottom right corner to turn on the
backlight. Press the button again to turn it off.
