S-GSM-CQ/REV1.0
2014-02-18
4
Step 3:
Ensure that there is sufficient
Air Time
loaded on the SIM card.
Add your cell phone as an “Authorised Number.” To do this, send the command
“
admin
” followed by a
space
, followed by your cell phone
number
with the
country code (27 for SA) at the beginning of the number. E.g. To add the cell
phone number 0826452344, the user will send:
admin 27826452344
You will receive a response from the GSM Communicator stating:
“You have been successfully added as an Authorised User on this device.”
You may now change other parameters on the device and all SMS alerts will be
sent to this cell number.
IMPORTANT:
Please take care to ensure that the correct number is sent
using the correct format. An error may result in the user being "locked
out", which can only be reset using the Sentry USB dongle together with
the Sentry GSM PC application.
Step 4:
If you wish SMS alerts to be sent to a second destination simultaneously, you
may add a second number in the same format as above by sending the following
SMS to the device from the authorised cell phone used in step 3:
Report Destination 1:
**13*number
E.g.
**13*27823259021
Up to 5 report destinations may be set, please see complete user manual for
further details if required.
