Step 32 Install 2x6 Rafters
Locate (10) ten 78-3/4" long 2x6 rafters. Working from the center, install (2) two rafters on the
front side of the ridge and one back side. The rafters should align with the dormer trusses and will
be approximately 3/4" above the ridge beam to allow for ventilation. Use a string to check the
alignment. Secure the rafters to the ridge beam with H1 hangers using 1-1/4" screws. When
possible screw through the ridge board into the rafter using 2-1/2" deck screws. Install the remaining
rafters alternating one on the front of the ridge and then one on the back side. This will help keep
the ridge board straight.
Use H1 hangers to secure the rafter ends to
the ridge using 1-1/4" screws. Using a
hammer, bend the hanger tips that extends
below the ridge.
Bend Hanger Tip
.
.
. .
String
