MODEL: M2MNV
■ Output
Current signal input (no receiving resistor):
Equal to the input signal
Current signal input (receiving resistor 50 Ω):
Voltage signal equal to [Current × 50 Ω]
Voltage signal input: Equal to the input signal
■ Switching Command: Relay or open collector
Contact detecting: 5 V DC / 1 mA
Detecting levels: ≤ 1 kΩ at ON / ≥ 10 kΩ at OFF
INSTALLATION
Power Consumption
•AC Power input:
Approx. 3 VA at 100 V
Approx. 4 VA at 200 V
Approx. 5 VA at 264 V
•DC power input: Approx. 2 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 150 g (0.33 lbs)
PERFORMANCE in percentage of span
Accuracy: ±0.1 % (input code 2)
Temp. coefficient: ±0.010 %/°C (±0.006 %/°F) (input code
2)
Switching response time: ≤ 5 msec.
Leakage current at open circuit: ≤ 1 μA
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
(signal channel to switching command contact to power)
Dielectric strength:
2000 V AC @1 minute
(switching command contact to power to ground)
2000 V AC @1 minute
(signal channel to power to ground)
1500 V AC @1 minute
(signal channel to switching command contact)
STANDARDS & APPROVALS
CE conformity:
EMC Directive (2004/108/EC)
EMI EN 61000-6-4: 2007
EMS EN 61000-6-2: 2005
Low Voltage Directive (2006/95/EC)
EN 61010-1: 2001
Installation Category II
Pollution Degree 2
Signal channel or switching command contact to power:
Reinforced insulation (300 V)
Signal channel to switching command contact: Basic
insulation (300 V)
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG
