SENTON Enterprises Limited
信
通
企
業
有
限
公
司
Flat 10, 17/F, Fo Tan Industrial Centre,
香港沙田火炭坳背灣街
26-28
號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong
富騰工業中心
17
樓
10
室
Tel: (852) 2687-1712 Fax: (852) 2687-4125
電
話
: (
八五二
)
二六八七
一七一二
(
四線
)
E-mail address:
傳真
: (
八五二
)
二六八七
四一二五
112905A-1 14
MIXED MODE DIALING (Temporary Pulse to Tone Dialing)
1.
If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank
by Phone , etc.), ensure that the Tone/Pulse switch on the rear of the base unit is set to the Pulse
position.
2.
Press the TONE (*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing
mode resumes when the call is ended.
PAUSE FUNCTION
•
In some cases, such as PABX or long distance service, a pause may be needed in the dialing
sequence. Pressing the handset RE/PA/DELETE button inserts the programmed time interval
between dialed numbers.
FLASH FUNCTION
•
Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your
local phone company. Flash can also be used to restore a dial tone to make a new call.
CHANNEL SELECTION (40 Channels)
•
Your cordless telephone lets you select a channel from the 40 frequencies available to transmit
signals between the base unit and handset. If the existing channel becomes noisy or starts having
interference, you can either move closer to the base unit or press the SCAN/OPTION button on the
handset until a better reception is found.
OUT OF RANGE WARNING
•
The handset and base unit communicate up to a certain maximum range. The distance can be
affected by weather, power lines, or even other cordless telephone.
•
If you are far away from the base unit, the handset beeps and “ OUT RANGE” is shown on the
LCD Display to warn you that the background noise level is too high for proper communication
between the handset and the base unit.
•
When you hear this sound and see the “OUT RANGE” display, you should move closer to the base
unit. Otherwise, the call will automatically cut off after 20 seconds.
LOW BATTERY WARNING
•
When the handset battery voltage level is low, the handset LCD Display shows “LOW BATTERY”.
•
Return the handset on the base cradle to charge.
PAGING FUNCTION
•
If you have misplaced the handset or need to alert person nearly the handset, press the PAGE button
on the base unit. Each press of this button will activate the handset to beep for 20 seconds and LCD
Display shows “PAGING” while it is being paged by the base unit
。
NOTE:
Even if the handset is in RING OFF mode, the base unit can page the handset.
CALLER ID OPERATION
GETTING TO KNOW YOUR NEW PHONE
IMPORTANT:
Subscription to Caller ID (CID)/Call Waiting ID services from your local phone company
is required for using the Caller ID/Call Waiting ID features of the 4313382. Your new 4313382 telephone
gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting
ID.