SENTON Enterprises Limited
信
通
企
業
有
限
公
司
Flat 10, 17/F, Fo Tan Industrial Centre,
香港沙田火炭坳背灣街
26-28
號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong
富騰工業中心
17
樓
10
室
Tel: (852) 2687-1712 Fax: (852) 2687-4125
電話
: (
八五二
)
二六八七
一七一二
(
四線
)
E-mail address:
傳真
: (
八五二
)
二六八七
四一二五
IMPORTANT:
It is not advisable to save a telephone number without the corresponding name in the
Phonebook. This will lead to improper displays on Private and Out of Area calls.
NOTE:
When no active buttons are pressed for 20 seconds, the LCD Display will automatically return to
STANDBY mode.
PLACING CALLS FROM THE PHONEBOOK
1.
Press the DN button.
2.
Press the UP or DN button to find the one you want to call.
3.
Press the TALK button to dial out the telephone number.
4.
Start your conversation.
5.
To end your conversation, either press the TALK button or place the handset on the base unit.
NOTE:
Be sure to check that the line is not in use by another extension.
DELETING A STORED NUMBER
1.
Press the DN button.
2.
Press the UP or DN button to find the one you want to delete.
3.
Press the SELECT button. The LCD Display will show “QUICK EDIT ERASE”.
4.
Press the UP or DN button to select “ERASE”, and then press the SELECT button. The LCD will
show “ ERASE NO YES”.
5.
Press the UP or DN button to select “ YES” and then press the SELECT button to confirm a
deletion.
6.
Press the EXIT/MUTE button to return to STANDBY mode.
MIXED MODE DIALING (Temporary Pulse to Tone Dialing)
1.
If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank
by Phone , etc.), ensure that the Tone/Pulse switch on the rear of the base unit is set to the Pulse
position.
2.
Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing
mode resumes when the call is ended.
PAUSE FUNCITON
•
In some cases, such as PABX or long distance service, a pause may be needed in the dialing
sequence. Pressing the handset RE/PA button inserts the programmed time interval between dialed
numbers.
FLASH FUCTION
•
Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your
local phone company. Flash can also be used to restore a dial tone to make a new call.
CHANNEL SELECTION(40 Channels)
•
Your cordless telephone lets you select a channel from the 40 frequencies available to transmit
signals between the base unit and handset. If the existing channel becomes noisy or starts having
interference, you can either move closer to the base unit or press the CHN button on the handset
until a better reception is found.
LOW BATTERY WARNNIG
•
When the handset battery voltage level is low, the handset LCD Display shows “
” at the lower
left corner of handset display.
041505A-1 14
