background image

SENTON Enterprises Limited               

 

 

 

 

 

 

 

 

Flat 10, 17/F, Fo Tan Industrial Centre,               

香港沙田火炭坳背灣街

26-28

 

26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong         

富騰工業中心

17

10

 

Tel: (852) 2687-1712    Fax: (852) 2687-4125   

電話

: (

八五二

二六八七

 

一七一二

  (

四線

E-mail address: 

[email protected]

                       

傳真

: (

八五二

二六八七

 

四一二五

 

 

IMPORTANT SERVICE INFORMATION

 

Read this manual before attempting to setup or use this instrument. It contains important information 
regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing 
and proof  of purchase to simplify and accelerate any needed action. If you need assistance or service, 
call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday. You 
can also visit our web site at 

http://www.nwbphones.com

 for technical support and information on our 

other products.

 

 
 

 

WARNING

 

To prevent fire or shock hazard, do not expose this product to rain or any type of 
excess moisture. If accidentally dropped into water, the AC adapter should 
immediately be unplugged from the wall along with the telephone line cord. 
 
 

THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF 

IMPORTANT OPERATING AND MAINTENANCE (SERVICING) 

INSTRUCTIONS IN    THE OWNER'S MANUAL. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

    Wall Mount Screws and Hardware 

 

  AC Adaptor 

  User’s Manual 

  Warranty Card 

    Accessory Order Form 

Excursion

®

36070 

 

CARTON CONTENTS

 

 

    Excursion

® 

36070 Base and Handset 

    Rechargeable Ni-Cd Battery Pack 

    Telephone Line Cord(Short and Long) 

 

041505A-1                                                                1 

Summary of Contents for Excursion 36070

























Reviews: