Sentiotec Switchbox, Installation And Usage Instructions, Page: 15 / 52

?" @*#C%2;#'")#0"C;#5+*/)%2;#'"I";#3F",;/"H*)325$0"(/;,$''2;#)3'"
3.1 Functions
3.1.1 Overview (table)
Function Description S1.1 S1.2 Point
Switch Button function OFF OFF 4.2.1
Button ON/OFF at the press of a button ON OFF 4.2.2
Timer A Active for set time after pressing button OFF ON 4.2.3
Timer B Timing activated after pressing button; deactivation by
pressing button again ON ON 4.2.4
3.1.2 Enable (Fig.
3
)
The input in the control panel is only transmitted to the output if 230Vac are exerted on the ENABLE input.
Activation via S2.1.
?>D>"@*#C%2;#'"C;#5+*/)%2;#
3.2.1 Button
The output is only active if the button on the control panel is pressed.
S1.3­S1.8 and S2.2­S2.8 have no impact on the function
3.2.2 Switch
The output acts like a switch. The output is activated at the press of a button until the button is pressed again.
S1.3­S1.8 and S2.2 –S2.8 have no impact on the function.
3.2.3 Timer A (Fig.
1
)
The output remains active for a set time after the button is pressed. The timer can be cancelled by pressing the
button again. The minimum settable time is 1 sec.
Switch S1.3 S1.4 ILC8 S1.6 S1.7 S1.8
Position Value Value Value Value Multiplier Unit
ON 1 2 4 8 x 10 Sec.
OFF 0 0 0 0 x 1 Min.
Calculation of time:
Unit:
switching from minutes to seconds
Multiplier: the number set via the values is multiplied by 10
Value: setting of the number. Switch positions are added up. For ON the respective number is added,
for OFF 0 is added. 1 must be added to the set value.
Example: duration 30 secs.
Switch S1.3 S1.4 ILC8 S1.6 S1.7 S1.8
Position OFF ON OFF OFF ON ON
0 + 2 + 0 + 0 X x 10 Sec.
1+ 0 + 2 + 0 + 0 =3 x 10 R!S"I*3C
n%6'0770'()%"0%+"$60.*"(%6'/$3'()%6" 5C"8VLS
WE DO IT FIRST.
EN