WORLD OF WELLNESS
EN
Instructions for installation and use
p. 5/26
2. Important information for your safety
The Qube sauna heater is constructed in accordance with recognised
safety rules and regulations. However, hazards can occur during
use. Therefore, adhere to the following safety information and the
specific warning notes in the individual chapters.
2.1. Use as intended
The Qube sauna heater is intended solely for heating sauna cabins,
in conjunction with a control device which does not include remote
start and preset time functions.
The Qube sauna heater may only be operated with a control device
that includes remote start or preset time functions in conjunction
with the optional safety shutdown feature (HT-SWL).
The Qube sauna heater may also be used in public saunas only in
combination with the optional safety shut-off (HT-SWL).
Any use exceeding this scope is not considered as intended. Use
that is not considered as intended can lead to damage to the product,
to severe injuries or death.
2.2. Safety information for the installation engineer
●
Installing and connecting the sauna heater may only be performed
when the power supply is disconnected.
● Installation may only be performed by a qualified electrician or
similarly qualified person.
● An all-pole disconnecting device with full cut-off must be fitted
on-site in accordance with overvoltage category III.
●
Always use silicone cables that are heat-resistant up to 150 °C
to connect the heater.
