WORLD OF WELLNESS
Installation instructions, only for experts
p. 22/46
5.6. Connecting the power booster (optional)
1. Guide the cable for the power booster through the cable bushing
b
into the
connection area for 230 V/400 V
g
.
2. Connect the cable for the power booster to the terminal strip
f
in ac-
cordance with the connection diagram. To do so, use terminal
“
ST1
” for the safety circuit, and terminal “
ST2
” for the control circuit.
Observe the operating instructions for the respective device.
5.7. Connecting heater sensor F1
1. Guide the wires for the heater sensor through the cable bushing
6
into the
low-voltage connection area
1
.
2. Connect the red wires for the heater sensor to the terminals labelled “
STB
”
in terminal strip
2
.
3. Connect the white wires for the heater sensor to the terminals labelled “
F1
”
in terminal strip
2
.
5.8. Connecting bench sensor F2 (optional)
1. Guide the wires for the bench sensor through the cable bushing
5
into the
low-voltage connection area
1
.
2. Connect the wires for the bench sensor to the terminals labelled “
F2
” in
terminal strip
2
.
5.9. Connecting humidity temperature sensor FTS2 (optional)
1. Guide the wires for the sensor through the cable bushing
6
into the low-
voltage connection area
1
.
2. Connect the wires for the temperature sensor to the terminals labelled “
F2
”
in terminal strip
2
.
a. Connect the black wire to the right terminal.
b. Connect the brown wire to the left terminal.
