24
Operating instructions for the user - Figure
5
1 For your safety
CAUTION - Damages of device:
Do not pour water on the sauna control or clean it with
a very wet cloth.
For cleaning please use a cleaning cloth, which has
been slightly moistened with a mild soapy solvent
(dish detergent).
WARNING - Fire hazard:
Prior to turning on the sauna control and when
selecting the start-time (time until the stove
starts) make sure that no combustible objects
have been placed on top of the stove.
2 Turning the sauna interior lighting
on / off
1. Key
1
turns sauna interior lighting ON / OFF.
3 Operation
3.1 Operation without selected time
1. Press ON / OFF
2
key
The display
4
indicates 00.00 (Display blinks)
The signal lamp
5
OPERATION lights up.
2. Press START / STOP
8
key.
The sauna heater starts.
The signal lamp
3
HEATING lights up.
Depending on the device type the display
4
indi-
cates 00.00 or the temperature measured in the
area of the temperature sensor.
3. Set the desired temperature with the rotary knob
TEMPERATURE
6
in the range of
50 - 125 degrees Celsius.
4. To exit:
4.1 Press START / STOP
8
key.
The sauna heater turns off.
The display indicates 00.00 (Display blinks)
The signal lamp
3
HEATING goes out.
The control is ready for entering a selected time
or a restart.
4.2 Press ON / OFF
2
key.
The sauna control is turned off.
3.2 Operation with selected time
1. Press ON / OFF
2
key
The display
4
indicates 00.00 (Display blinks)
The signal lamp
5
OPERATION lights up.
NOTE - „High-Speed Run“:
Pressing and holding the PLUS / MINUS keys
7
trigger
a „high-speed run“ entry after 5 seconds.
Summary of Contents for A2-15
