Maintenance
Sentinel Kinetic MVHR Installation & Commissioning
32
Stage 3:
Remove the Condensate Tray.
Note: Remove the additional Security Strap on the 300Z & ZH before removing the Condensate Tray
Caution
: Keep the Tray as horizontal as possible as this may contain condensate.
Stage 5:
Remove the two Heat Exchanger fixing Brackets and Heat Recovery Cell.
Note : Take care when removing the Heat Recovery Cell.
Cleaning the Heat Exchanger Cell:
Wash the outer cover and heat exchanger in warm water using a mild detergent (such as Milton Fluid) and dry thoroughly.
Brackets
Security Strap
300Z & 300ZH
