© Copyright Sentient ®. All documentation rights reserved.
3
1.4 Quick Connection Setup
NOTE:
BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND
THAT YOU CONNECT YOUR CAMERAS TO YOUR DVR AND TEST YOUR
SYSTEM FIRST.
NOTE:
WE CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT
LEAVES US BUT OCCASIONALLY THINGS FAIL AND IT IS BETTER TO KNOW
NOW THAN AFTER YOU HAVE FITTED EVERYTHING!
1. Place the DVR on a flat horizontal position and connect your cameras to the
video input on the rear of the DVR.
2. Connect your TV/ display monitor to the video output on the rear of the DVR.
3. Connect the network cable to the RJ45 socket on the rear of the DVR then
connect the other end of the cable to a spare socket on the router.
4. Connect the Mouse to the USB interface found in either the front or rear
panels.
5. Connect your DVR a power outlet and switch on the power.
Caution
For a PTZ camera, please refer to the relevant instructions. Connect the power cable
after all other cables are connected correctly.
