1.
Adding Water
Remove the water reservoir cover and pour potable
water into the reservoir. Make sure the water level is
below the
FULL
mark as shown in the right picture.
Close the cover at once to avoid foreign matter enter.
Warning
: Do not pour the water into the internal
water tank underneath the ice basket. This tank is
not big enough and will affect the ice making
performance.
2.
Turn “ON”
：
Operation Panel and Display Area
A.
Plug the Ice Maker into the outlet, the Power
Indicator
-PUMP+
-
AN
+
DC Fan
low
high
water
1
and
will turn on and flash. The water
tank starts filling the inner tank under the ice basket until
it reaches required water level, and
symbol turns off.
Press Power Button (ON/OFF) on the operation panel to
start making ice. During ice making process,
stays
on, ice making symbol
zooms, and the current
ambient temperature is shown on the upper left of the
display. For example, ”25” indicates that the current ambient temperature is 25 degrees
Celsius. After a few minutes of ice making, the number in Time Indicator starts to flash,
indicating the remaining time for this ice making cycle. For example, a flashing number “8”
means it will take 8 minutes to finish the ice making.
B.
It starts dumping ice after this ice making cycle finishes. The ice making symbol
flashes,
and the inner tank begins to replenish till the set value, then begins the next ice making
cycle. Symbol
lights up if there is insufficient water in tank, and the machine stops
working. Add water, turn on the machine and you can continue making ice.
C.
Each ice making cycle lasts about 15-25 minutes. It varies according to the ambient
temperature and water temperature. The duration especially lasts longer when you use it
for the first time, or the water temperature is high.
D.
Adjustment of ice thickness: During the ice making cycle, the thickness of the ice cube is
can be adjusted by pressing “+” and “—” on the operation panel. The default figure at the
lower right of the display for ice making time is "0". Each time you press "+", the duration
adds 1 minute, and the ice cube will be thicker. The maximum time can be added is 6
minutes. The actual duration will be displayed in the lower right corner of the display. Each
USING YOUR ICE MAKER
OPERATION
AREA
DISPLAY
AREA
ON/OFF
TIMER
Cover for the
water reservoir
8
