www.sentera.eu
MIW-MTV-1-010-NA-EN-000 - 02 / 11 / 2016
5 - 7
back to the table of contents
MOUNTING INSTRUCTIONS IN STEPS
Before you start mounting your potentiometer, read carefully
“Safety and
Precautions”
and proceed with the following mounting steps:
For inset mounting
1.
Remove the knob by turning it to the right until it pops out.
2.
Unscrew the loose nut to remove the cover of the external enclosure.
3.
Do the wiring according to the wiring diagram (see
Fig. 1 “
Wiring and connections”
).
Fig. 1 Wiring and connections
Power
supply
Output
voltage
4.
Mount the internal enclosure into the wall according to the mounting dimensions
shown in
Fig. 2
. “
Mounting dimensions - inset mounting”.
Fig. 2 Mounting dimensions - inset mounting
26
33
50x50
82
89
7
NOTE
Mount the unit so that the terminal block and connections are at the lower side.
5.
Mount back the cover using the nut.
6.
Put back the knob and turn it to off position.
7.
Turn on the power supply.
MTV-1/010-NA
230 VAC
POTENTIOMETER