Sentera Controls RSMFH-2R, Mounting And Operating Instructions

Page: 4 / 10

www.sentera.eu
MIW-RSMFH-2R-EN-000 - 19 / 02 / 2020 4 - 10
back to the table of contents
PRODUCT DESCRIPTION
The RSMFH-2R series are multifunctional room transmitters which
measure temperature, relative humidity, CO
2
concentration level and
ambient light. They feature 24 VDC power supply and three analogue
/ modulating outputs. All parameters are accessible via Modbus RTU.
ARTICLE CODES
Code Supply Connection
RSMFH-2R
24 VDC RJ45 or terminal block
INTENDED AREA OF USE
■
Monitoring temperature, relative humidity and CO
2
level in HVAC applications
■
Suitable for residential and commercial buildings
■
For indoor use only
TECHNICAL DATA
■
3 analogue / modulating outputs:
► 0—10 VDC mode: min. load 50 kΩ (R
L
≥ 50 kΩ)
► 0—20 mA mode: max. load 500 Ω (R
L
≤ 500 Ω)
► PWM (open-collector type) mode: PWM Frequency: 1 kHz, min. load 50 kΩ (R
L
≥
50 kΩ); PWM voltage level 3,3 VDC or 12 VDC
■
Selectable temperature range: 0—50 °C
■
Selectable relative humidity range: 5—85 %
■
Selectable CO
2
range: 0—2.000 ppm
■
Ambient light sensor with adjustable ‘active’ and ‘standby’ level
■
Replaceable CO
2
sensor element
■
3 LEDs for status indication
■
Accuracy: ±0,4 °C (0—50 °C); ±3 % rH (5—85 % rH); ±30 ppm CO
2
(0—2.000 ppm),
depending on the selected parameter
■
Maximum power consumption: 2,4 W
■
Nominal power consumption in normal operation: 1,2 W
■
Imax: 100 mA
■
Enclosure:
► rear plate: plastic ABS, black (RAL 9004)
► front cover: ASA, ivory (RAL 9010)
■
Protection standard: IP30 (according to EN 60529)
■
Operating ambient conditions:
► temperature: 0—50 °C
► rel. humidity: 5—85 % rH, (non-condensing)
■
Storage temperature: -10—60 °C
RSMFH-2R
MULTIFUNCTIONAL
ROOM TRANSMITTER