www.sentera.eu
MIW-RMFPM-2R-EN-000 - 28 / 05 / 2019
5 - 11
►
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 1: General requirements
►
EN 61326-2-3:2013 Electrical equipment for measurement, control and
laboratory use - EMC requirements - Part 2-3: Particular requirements - Test
configuration, operational conditions and performance criteria for transducers
with integrated or remote signal conditioning
■
WEEE 2012/19/EC
■
RoHs Directive 2011/65/EC
OPERATIONAL DIAGRAM
Max
range
Min
range
60
40
100
0
rH Min range
0
0
0 CO
2
Min range
CO
2
Max range
Max
Min
T Min range T Max range
rH Max range
Input
Register 2
[%]
50
100
2.000
rH [%]
T [°C]
CO
2
[ppm]
WIRING AND CONNECTIONS
RJ45 socket (Power over Modbus)
Pin 1
24 VDC
Supply voltage
Pin 2
Pin 3
A
Modbus RTU communication, signal A
Pin 4
Pin 5
/B
Modbus RTU communication, signal /B
Pin 6
Pin 7
GND
Ground, supply voltage
Pin 8
/B
A
GND
24 VDC
8 mm
8 mm
8 mm
8 mm
RJ45
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
MOUNTING & OPERATING INSTRUCTIONS IN STEPS
Before you start mounting the RSMFM-2R room transmitter, read carefully
“Safety and Precautions”
. Choose a smooth surface (a wall, panel and etc.).
Follow these steps:
1.
Using a flat screwdriver, remove the front white cover by releasing the snap-fits
on its both sides (See
Fig. 1
Snap-fits release
).
RMFPM-2R
MULTIFUNCTIONAL ROOM
CONTROLLER
