Sentera Controls RMFPM-2R, Mounting And Operating Instructions

Page: 4 / 11

www.sentera.eu
MIW-RMFPM-2R-EN-000 - 28 / 05 / 2019 4 - 11
back to the table of contents
PRODUCT DESCRIPTION
The RMFPM-2R are multifunctional room controllers featuring adjustable
temperature, relative humidity and CO
2
setpoints. They are Power over Modbus
supplied and all parameters and the output are accessible via Modbus RTU.
ARTICLE CODES
Code Supply Connection
RMFPM-2R 24 VDC, PoM RJ45
INTENDED AREA OF USE
■
Control of temperature, relative humidity and CO
2
levels
■
Suitable for residential and commercial buildings
■
For indoor use only
TECHNICAL DATA
■
Selectable temperature, relative humidity and CO
2
setpoints
■
Ambient light sensor with adjustable ‘active’ and ‘standby’ level
■
Bootloader for updating the firmware via Modbus RTU communication
■
3 LEDs for status indication
■
Accuracy: ±0,4 °C (0—50 °C); ±3 % rH (0—100 % rH); ±30 ppm CO
2
±3 %
(0—2.000 ppm CO
2
), depending on the selected parameter
■
Maximum power consumption: 1,2 W
■
Nominal power consumption in normal operation: 0,9 W
■
Imax: 50 mA
■
Enclosure:
► rear plate: plastic ABS, black (RAL 9004)
► front cover: ASA, ivory (RAL 9010)
■
Protection standard: IP30 (according to EN 60529)
■
Operating ambient conditions:
►
temperature: 0—50 °C
► rel. humidity: 0—100 % rH, (non-condensing)
■
Storage temperature: -10—60 °C
STANDARDS
■
Low Voltage Directive 2014/35/EC:
► EN 60529:1991 Degrees of protection provided by enclosures (IP Code)
Amendment AC:1993 to EN 60529
► EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
■
EMC Directive 2014/30/EC:
► EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
► EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic
standards - Immunity for residential, commercial and light industrial environments
► EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic
standards - Emission standard for residential, commercial and light-industrial
environments Amendments A1:2011 and AC:2012 to EN 61000-6-3
RMFPM-2R
MULTIFUNCTIONAL ROOM
CONTROLLER