background image

www.sentera.eu

MIW-MDB-M-6-EN-000 - 07 / 09 / 2021

4 - 7

back to the table of contents

PRODUCT DESCRIPTION

MDB-M/6 is a compact PoM distribution box. It is suitable for power and data 
distribution between connected units and compatible with transmitters, intelligent 
sensors, sensor controllers, HVAC controllers, fan speed controllers and all other 
Sentera products with Modbus RTU communication.

ARTICLE CODES

Article code

Supply

Imax

Connection type

MDB-M-6

24 VDC (PoM)

1,5 mA

RJ45

INTENDED AREA OF USE

 

Distribute power and data between Modbus RTU compatible units

TECHNICAL DATA

 

Supply voltage: 24 VDC (Power over Modbus)

 

Total I/O current rating: Imax 1,5 A

 

RJ45 connectors for Power over Modbus communication and power supply

 

Surface mountable

 

Maximum total cable length: up to 100 meters

 

Easy to install

 

Reduces installation and equipment costs

 

Protection class: IP65

 

Enclosure: ABS plastic, colour: grey (RAL7035)

 

Storage temperature: -40—85 °C

 

Operating ambient conditions: 

 

temperature range: -30—70 °C

 

rel. humidity: 20—90 % rH (non-condensing)

STANDARDS

 

Low Voltage Directive 2014/35/EU 

 

 EN 60664-1:2007 Insulation coordination for equipment within low-voltage 
systems - Part 1: Principles, requirements and tests

 

EMC Directive 2014/30/EU

 

 

EN 55022:2010 Information technology equipment - Radio disturbance 
characteristics - Limits and methods of measurement Amendment AC:2011 to 
EN 55022:2010 

 

 EN 55024:2010 Information technology equipment - Immunity characteristics - 
Limits and methods of measurement

 

 EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - 
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

 

 EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits 
- Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems, for equipment with rated current <= 16 A per phase and 
not subject to conditional connection supply systems, for equipment with rated 
current <= 16 A per phase and not subject to conditional connection

 

WEEE Directive 2012/19/EU

 

RoHs Directive 2011/65/EU

POWER OVER MODBUS 
DISTRIBUTION BOX

MDB-M-6

Summary of Contents for MDB-M-6








Reviews: