![background image](http://html.mh-extra.com/html/sentera-controls/hps-m-10k-2/hps-m-10k-2_mounting-and-operating-instructions_1244502003.webp)
www.sentera.eu
MIW-HPS-X-2-EN-000 - 14 / 03 / 2017
3 - 15
SAFETY AND PRECAUTIONS
Read all information, the datasheet, mounting instructions and wiring scheme
before working with the product. For personal and equipment safety, and for
optimum product performance, make sure you entirely understand the contents
before installing, using, or maintaining this product.
For safety and licensing (CE) reasons, unauthorised conversion and / or modifications
to the product are not permitted.
The product must not be exposed to abnormal conditions, such as: extreme
temperatures, direct sunlight or vibrations. Chemical vapours with high concentration
in combination with long exposure times can affect the product performance. Make
sure the work environment is as dry as possible; check for condensation spots.
All installations shall comply with the local health and safety regulations and local
electrical codes. This product can only be installed by an engineer or a technician
who has an expert knowledge of the product and safety precautions.
Avoid contacts with energised electrical parts; always treat the product as if it
is life. Always disconnect the power source before connecting the power cables,
servicing or repairing the product.
Always verify that you apply appropriate power supply to the product and use wires
with appropriate size and characteristics. Make sure that all the screws and nuts are
well tightened and fuses (if any) are fitted well.
Recycling of equipment and packaging should be taken into consideration and
disposed in accordance with local and national legislation / regulations.
In case there are any questions that are not answered, please contact your technical
support or consult a professional.
DIFFERENTIAL PRESSURE
TRANSMITTER
HPS-X -2