www.sentera.eu
MIW-HPD-X-EN-001 - 19 / 03 / 2020
3 - 10
SAFETY AND PRECAUTIONS
Read all the information, the datasheet, the Modbus register map, the mounting and
operating instructions and study the wiring and connection diagram before working
with the product. For personal and equipment safety, and for optimum product
performance, make sure you entirely understand the contents before installing, using,
or maintaining this product..
For safety and licensing (CE) reasons, unauthorised conversion and / or modifications
of the product are inadmissible.
The product should not be exposed to abnormal conditions, such as: extreme
temperatures, direct sunlight or vibrations. Long-term exposure to chemical
vapours in high concentration can affect the product performance. Make sure the
work environment is as dry as possible; avoid condensation.
All installations shall comply with local health and safety regulations and local
electrical standards and approved codes. This product can only be installed by
an engineer or a technician who has expert knowledge of the product and safety
precautions.
Avoid contacts with energised electrical parts. Always disconnect the power
supply before connecting, servicing or repairing the product.
Always verify that you apply appropriate power supply to the product and use
appropriate wire size and characteristics. Make sure that all the screws and nuts
are well tightened and fuses (if any) are fitted well.
Recycling of equipment and packaging should be taken into consideration and these
should be disposed of in accordance with local and national legislation / regulations.
In case there are any questions that are not answered, please contact your
technical support or consult a professional.
DUAL DIFFERENTIAL
PRESSURE TRANSMITTER
HPD
