www.sentera.eu
MIW-DTP-M-EN-000 - 25 / 11 / 2020
4 - 7
PRODUCT DESCRIPTION
The DTP-M series are digital temperature water pipe sensors powered over Modbus
with 24 VDC via an RJ45 connector. They are intended for mounting onto metal
pipes and are compatible with various temperature control systems. Thanks to the
copper contact plate, we can ensure fast response times and faster response time
and a more accurate temperature measurement of the media within the pipe.
ARTICLE CODES
Code
Power supply
Imax
DTP-M
24 VDC, PoM
8 mA
INTENDED AREA OF USE
Measuring temperature in metal water pipes
TECHNICAL DATA
■
Sensor range: 0—85 °C
■
Modbus RTU communication
■
Easy wiring via an RJ45 socket
■
Quick and easy mounting via a cable tie
■
Copper plate for enhanced thermal conductivity
■
Heat resistant cable tie 300 x 4,8 mm included
■
Thermal pad for a more accurate temperature measurement included (19 x 14 x
1,5 mm)
■
Supply voltage: 24 VDC, Power over Modbus
■
Protection standard: IP65
■
Operating ambient conditions:
►
temperature: -30—85 °C
►
rel. humidity: 5—95 % rH (non-condensing)
STANDARDS
■
EMC directive 2014/30/EU:
►
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 1: General requirements
►
EN 61326-2-3:2013 Electrical equipment for measurement, control and
laboratory use - EMC requirements - Part 2-3: Particular requirements - Test
configuration, operational conditions and performance criteria for transducers
with integrated or remote signal conditioning
►
EN 61326-2-5:2013 Electrical equipment for measurement, control and
laboratory use - EMC requirements - Part 2-5: Particular requirements - Test
configurations, operational conditions and performance criteria for devices with
field bus interfaces according to IEC 61784-1
■
WEEE Directive 2012/19/EC
■
RoHs Directive 2011/65/EC
DTP-M
DIGITAL TEMPERATURE PIPE SENSOR
