ST805C PON Power Meter
8
Press "F2" to exit relative value test after finishing test.
5.3 Threshold setup
5.3.1
Under main interface, lon
g press "▲" to enter
threshold management interface.
5.3.2
Choose threshold group number by "▲", "▼", and
then browse three threshold values (1310nm, 1490nm,
1550nm) through "◄", "►" in chosen group.
5.3.3
When setting threshold value, please select the
group or wave need to be modified, and then long press
"OK" to enter threshold edit state. You can
use "▲", "▼"
edit threshold value, and use
"◄", "►" select value
location, press "OK" to save and exit, press "OFF" to exit
without save.
When browsing threshold value in management interface,
short press "OK" to enable current threshold value, then
you can press "OFF" to exit.
Automatically exit test interface without operation in 10
seconds.
Under main interface, long press “OK” button to delete the
threshold value. Then the value will not be displayed, and
threshold value judgment is invalid.
5.4 Time setting
Under main interface, l
ong press "►" to enter time setting,
can
edit time through "▲", "▼", and adjust position by
