STC-HD133DV
OSD Remote Control
User Guide
8
Rev 1.0
IV. Programming the Sentech OSD Remote Control
A. Assigning Camera Functions to the Buttons
In conjunction with the HD133Ctrl software, the Sentech HD133 Remote Control is designed to allow users to assign and control
up to 12 total camera functions with the remote.
In order to assign the camera functions to the remote control the user must open the HD133Ctrl software.
At the top of the
uCOM: Push Button
tab, the user can find the
single push
and
hold
option for External switch A through F.
Therefore, every button on the remote control has a 2 function programming availability, thus making a total of 12
programmable functions.
To assign camera functions to the External switch (buttons A-F), simply select the desired function in the adjacent scroll-down
menu of the appropriate External switch.
Once all of the desired function assignments are made click the
uCOM
EEPROM
button at the bottom of the page. This will
override the existing settings on the camera’s EEPROM with the new settings.
IMPORTANT: When the setting changes are saved to the EEPROM, it is then necessary to turn the camera off and back on to
begin using the new settings saved to the EEPROM.
