1. Access to the main menu of App and power on your iSOBER 10 unit.
2. Tap “Device List” then the unit’s Bluetooth ID shows and tap it to pair the unit and the App.
3. Make sure “APP” showing on the display of iSOBER 10 and tab “TEST” button on an App.
*if there is no “APP” on display, the unit is not paired with a mobile application. Make sure the
activation of Bluetooth on your mobile device and turn on iSOBER 10 unit again.
4. The unit will be ready to blow status with showing ‘bLo(blow)’
5. Blowing through the mouthpiece into the unit for 4 seconds following guides of App.
6. If the camera mode is on, the camera of your mobile device will take a picture while blowing.
*Camera mode could be used to verify the actual testing and available to turn ON/OFF.
