6
EN | Directions for Lay Users
B) Sensor application using EC-MI
Measurement
Sites
1
Ensure SDM
displays “Ready
for use”.
Iso
pr
op
an
ol
70
%
2
Clean
Measurement
Site selected by
the home care
provider, using
Isopropanol 70%
soaked wipe.
3
Pull both adhesive
tapes off Ear Clip,
attach Ear Clip
to earlobe with
retainer ring on
the back side.
4
Open Docking
Station, remove
sensor, close
Docking Station.
Note:
Do not
touch the sensor
surface with any
hard objects
or fingernails.
Otherwise, the
sensor could be
damaged.
5
Apply one drop of
Contact Gel to the
sensor surface
Note:
Avoid
contact with
injured skin. Do
not use when
exhibiting allergic
reactions to one of
the components.
6
Click sensor into
Ear Clip rotate
sensor to spread
Contact Gel
Note:
Earlobe
must cover the
entire sensor
surface. Ensure
to hold the sensor
such that the
contact liquid
does not run off
the sensor face.
7
Wrap the sensor
cable around the
ear and secure it
with an adhesive
tape.
Note:
Do not lie
on Ear Clip as
this may lead
to incorrect
measurements.
Important Note:
Route the sensor
cable properly (e.g.
with a Clothing
Clip) to avoid
entanglement or
strangulation.
