Chapter 7
40 Access Point Controller Card (APCC)
Installation Guide
Sensys Networks, Inc.
Figure 7.5. Setting the channel monitor buzzer with front-panel dip switch 1
2. Press the
Enter
button for five seconds to save the configuration to flash
memory or continue with other configuration activities described in this
section.
Starting TrafficDOT and Connecting to an APCC
TrafficDOT is a configuration manager and monitoring tool for an access point
and all its associated devices (sensors, repeaters, and contact closure cards).
TrafficDOT provides a graphical user interface (GUI) to the network's devices,
settings, and operations. The GUI simplifies both configuration and management
of installations.
TrafficDOT requires an IP network connection to the APCC. When configuring
contact closure cards, the connection is made by cabling a laptop to an APCC or
EX card. (Refer to the section
in Chapter 5 for additional
information.)
N
OTE
:
Refer to the
TrafficDOT Set Up and Operating Guide
for a more information on using
TrafficDOT with the Sensys Networks Wireless Vehicle Detection System.
Connect to the APCC with TrafficDOT by following these steps:
1. On a Windows laptop or PC, start TrafficDOT by clicking its icon. TrafficDOT's
Main
window opens with the
Connect
window open in front of it.
Summary of Contents for VDS240
Page 8: ...viii Access Point Controller Card APCC Installation Guide Sensys Networks Inc ...
Page 30: ...Chapter 5 22 Access Point Controller Card APCC Installation Guide Sensys Networks Inc ...
Page 42: ...Chapter 6 34 Access Point Controller Card APCC Installation Guide Sensys Networks Inc ...
Page 54: ...Chapter 7 46 Access Point Controller Card APCC Installation Guide Sensys Networks Inc ...
