User Manual
LonWorks TP/FT-10
Option module for PolluStat
M H 6144 INT, page 4
3.4. Service LED and Service Button functionality
The placement of the Service LED and Service Button (called also Service Pin) is shown on the picture
below.
Picture 3: Service Button and Service LED placement on the LonWorks option module
Standard Service LED signalization is described on the picture below. If other, please contact technical
support
.
Picture 4: Service LED signalization
Short press of the Service Button send to the network Service message.
Press longer than 15 seconds to reset the Update Rate parameter to default value 10 minutes.
3.5. Firmware Update
The option module firmware update can be done by user. Downloading the firmware to device is performed
by dedicated software run on Microsoft Windows operating system or by using the option Load application
image and attach an Image file path to the Echelon OpenLNS Commissioning Tool during
the module commissioning process (option Commission… when you right-click on the device shape).
The newest Application Image File for the option module in distribute on demand after request with the serial
numbers of devices to which they relate only. In case of any question, please contact technical support.
= OFF
=
ON
= OFF or ON
CONFIGURED
UNCONFIGURED
WINK
Time [sec]
Service LED
Service Button
