MULTISENS User Manual
6
MultiSens User Guide EN_v1.0_281218
3.
Mode
3.1.
Measuring Mode
If the device goes into the normal measuring mode after stabilization, the gas
concentration and the battery power level are displayed on the LCD monitor. Oxygen
is displayed in %vol, combustible gases in %LEL and H
2
S, CO in ppm unit. When the
concentration levels change, the value is displayed in real time, and when the levels
exceed the threshold for either LOW alarm or HIGH alarm (or TWA/STEL), the
display icons of
LOW
,
HIGH
,
TWA
or
STEL
blinks regularly and the alarm, LED and
vibration activates.
When the device goes to a safe area, the concentrations detected by the device
declines and the alarm stops. Even after going to a safe area after the alarms set off, the icon of the alarm does
not go away, and you must push the KEY button ( ) to make it go away.
3.2.
Display Mode
The displays in ten different modes as above are shown in the measuring mode every time when you press the
KEY button( ).
