manualshive.com logo in svg

Sensotec Rapidox 1100ZR-H-OL-LC, Instruction Manual, Page: 44 / 55

Share
Download
Sensotec Rapidox 1100ZR-H-OL-LC Instruction Manual Download Page 44

D11-044-1:  Rapidox 1100ZR-H-OL-LC O

2

 Analyser Instruction Manual 

 

 

D11-044-1 

38 

Last printed 08/11/2016 12:10:00 

 
 

display the pressure taken from the internal pressure sensor.  The axis is linear 
and auto-scaling.  To select the mode of the secondary axis select ‘view’ and then 

‘second axis display’.  Choose from ‘none’ or ‘pressure’. 
 

7.17

 

Loading an Old Run 

 
A previously logged data file can be loaded and viewed by selecting ‘Open Data 
File’ from the File menu and selecting the appropriate TXT or CSV file.  A 
progress bar is displayed while the data is being imported.  Note that very large 
data files may take several seconds to load.  The data is re-graphed and you can 

zoom, label axes, change colours etc., before printing the graph. 

 

7.18

 

Printing Graphs 

 

You can print the graph at any time by selecting ‘Print Plot’ from the File menu.  
This will bring up the printer dialogue box for your specific printer where you can 
chose various printing options.  Make sure that the printer page is set to landscape 
to obtain a full size print out. 
 

7.19

 

Data Logging in the Background 

 
It is possible to begin data logging and then minimise the windows to continue 

working with another application.  To minimise the graph simply click on the 
minimise button on the blue title bar at the top of the window.  You can then use 
the ALT + TAB keys to take you to other programmes already running.  To return 
to the graph simply maximise from the start menu bar or press ALT + TAB again.  
If the graph does not redraw immediately select ‘Zoom Full’ from the View menu 

to redraw. 
 

7.20

 

Pausing the Data Logging 

 

You can pause the data-logging at any time during the run by selecting the ‘data 
logger’ menu and selecting ‘pause’.  Repeat the action to continue, noting that the 
live graph will draw a straight line between the paused points to keep continuity 
of the axes.  The clock keeps ticking during the pause period. 

 
If you decide to access the menu of the Rapidox using the front keypad during 
data logging, then the software will pause automatically.  A message appears on 
the screen informing the user that the unit is being accessed from the keypad.  
Once the menu has been exited, the software will continue data logging from 

where it left off. 
 
 

Summary of Contents for Rapidox 1100ZR-H-OL-LC
























































Reviews:

No comments