LEVEL
click to
LEVEL
click to
ALARM2
04 OF 08
TYPE
click to
TYPE
click to
SUMMARY
click to
SUMMARY
click to
SUMMARY
click to
RELAY
click to
RELAY
click to
EXIT
click to
EXIT
click to
Once the alarm TYPE has been set you then need to set the RELAY output, that is deciding which relay
activates once the set alarm level is breached. The following sequence continues from the previous page
and describes the set up sequence
To select an option press and hold
the button until prompted to release.
To select an option press and hold the button until prompted to release.
á
1
relay
01=L20
á
L R1
01=L20
á
L R2
02=L20
á
L R1
Each button press increments the indicated relay to activate.
To access more options press and hold the button until
prompted to release and the following menu choices are
available at each button press. Again to select the desired
option when displayed press and hold the button until
prompted to release.
dec
test
inc
test
done
test
cancel
test
Select to DECrease the relay number
Select to exit the sequence without making
changes
Select to INCrease the relay number
Select if the correct relay number is displayed
and you want to store it onto the system.
Selecting SUMMARY from this group of menu options allows you to see what has already been set up
In this example a two channel system has two alarm level 1's set up. When you enter the option
alarm level one settings for the channel are displayed. Click the button to return to the previous
menu options. To view alarm level 2 settings go back and select ALARM2 option. Note you only
view the summary one channel at a time.
Page 21 of 25
www.sensors.ltd.uk
A Division of International Gas Detectors
Tel: +44 (0)161 483 1415
Fax: +44 (0) 161 484 2345
Email: [email protected]
