CONTENTS
12
13
Compass Calibration
Press and hold the CALIBRATE button (= CITY button)
for more than 2 seconds to access compass calibration
mode. In English mode, the calibration mode starts
with the voice message: “
START YOUR CALIBRATION
”
and (after 2 seconds) “
DRIVE YOUR VEHICLE IN TWO
COMPLETE CIRCLES
”. In Spanish mode, the messages
are: “
EMPIEZA CALIBRAR
” and (after 2 seconds) “
HAGA
DOS VUELTAS ENTERAS EN SU COCHE
”. The detector
flashes the 4 compass LEDs one after another (clockwise)
until the calibration is completed.
Perform the calibration on a level surface and following
these steps:
• Turn the detector on. (See Power & Volume Control .)
• Mount the detector on the windshield in your vehicle.
(See INSTALLING THE DETECTOR.)
• Press and hold the CALIBRATE button (= CITY
button) until you hear the detector talk and see
it flashing the compass LEDs clockwise, one after
another.
• Drive your vehicle in two circles. The size of the
circles and the direction that you drive does not
matter. The circles do not need to be perfect circles
but must be completed in the same direction. Each
circle should take a minimum of 20 seconds but no
OPERATION
